|
|
 |
 |
Supported Products
Products listed in this section are no longer available as new product. Heim Data offers full technical support and service support for these products.
If your intention is to PURCHASE ONE OF THESE PRODUCTS, please contact us with full details of your requirement. Our engineers will be pleased to offer alternative available new products with similar performance capabilities.
If your requirement is to be FULLY COMPATIBLE WITH SIMILAR PRODUCTS ALREADY IN USE, please contact us as we may be able to offer solutions to your requirement.
If you require technical support or service support for these products, please click the hot link through to our customer support services.
Please note that many of the signal channel module types used in these products are available as new equipment.
view larger image |
A40
125 kHz analog bandwidth
4 signal module slots
DAT-drive for 2 hrs recording at full bandwidth
The ultimate in high-performance portability, the A40 combines optional battery power with up to 8 channels of high-dynamic range recording. Light-weight, quiet and compact, the A40 is easily portable to outside test sites and does not affect vehicle dynamics during acoustic and road load data capture. Relating recorded data to vehicle and engine condition is easily achieved by using the auxiliary RPM and speed-pulsed inputs.
Technical Specification A40 (pdf - 27k)
|
|
view larger image |
A480
640 kHz analog bandwidth
24 signal module slots
AIT-2 drive for 5 hrs recording at full bandwidth
The A480 meets the growing need for increased channel recording and greater bandwidth
requirements. This compact, rugged data acquisition recorder offers a total system
sampling frequency of 1280 kHz and the capability to record up to 144 channels
for a minimum of two hours in a single box. Integrated, plug-in signal conditioning
modules are available for a wide range of sensors including our new 200 kHz high-frequency
module. In addition, the flexible A480 can be used as a stand alone data acquisition
recorder, as a digital front-end system (for real-time data acquisition and analysis),
and up to seven A480 recorders can be synchronously linked for large data acquisition
needs. A SCSI-2W port is provided to allow computer analysis of all collected
data.
Technical Specification
A480 (pdf - 1.27MB)
|
|
view larger image |
A60/A60S
125 kHz analog bandwidth
6 analog input and output channels
DAT-drive for 2 hrs recording at full bandwidth
Designed for those with a limited budget, this easy-to-use model contains all you need for accurate record and replay of 6 signal channels. Equipped for both direct voltage and ICP inputs with up to 25 kHz channel bandwidth, the A60 can function when other computer-based data acquisition systems are incapable of handling special bandwidth, resolution or duration requirements.
The A60s offers enhanced computer anyalysis. This derivative of the A60 offers high-speed data transfer via a SCSI-2 interface.
Technical Specifications for the A60 Recorder (pdf - 252k) |
|
view larger image |
A80
125 kHz analog bandwidth
8 signal module slots
DAT-drive for 2 hrs recording at full bandwidth
Looking for random, fast events over a long period of time? Recording up to 16 channels for at least 2 hours, the A80 can capture pre- and post-event data with high time and amplitude resolution. Off-line validation and selection of only the relevant data permits rapid digital download to an analysis computer via the built-in SCSI-2 interface. Suitable for seismic, acoustic, sonar, explosive, fatigue, crash test and many other research applications, A80 is the ideal multi-purpose data acquisition tool.
Technical Specification A80 (pdf - 27k)
|
|
view larger image |
A160
125 kHz analog bandwidth
16 signal module slots
DAT-drive for 2 hrs recording at full bandwidth
Large sensor arrays and multiple ancillary signal sources present no obstacle to the 32-channel A160. Flexible, independent module bandwidth allocation ensures that signals with both high and low bandwidth can be optimally packed, minimizing overall data rates. System calibration and set up is fully automatic, speedy and traceable to non-volatile configuration memories, reducing the possibility of operator induced error.
Technical Specification A160 (pdf - 27k)
|
|
 |
X160
Extender box for A160
16 signal module slots
If requirements dictate either 64-channel recording or up to 32 channels of replay and record, the X160 can be integrated with the A160 providing 16 more module interface slots. While designed to handle larger laboratory and test cell tasks, the A160/X160 system is robust and light enough for in-situ monitoring of rotating machinery, industrial processes and vehicle systems.
|
|
view larger image |
DiSC16 Digital Acquisition System
200 kHz analog bandwidth
8 signal module slots
The DiSC16 is a data acquisition and signal conditioning front-end for use in a wide variety of applications. Designed for data transfer direct to PC computers it is compatible with the other Industrial & Automotive recorders in all respects. It employs the same signal modules and data interface formats, allowing users to combine operations where both direct computer acquisition and remote recording are required.
Technical Specification DiSC16 (pdf - 152k)
|
|
view larger image |
D4
FORM 100 A Safety approval
4 Mbit/s total bit rate
3 signal module slots
1/2 ATR size
DAT-drive for 2 hr recording at 4 Mbit/s
The D4xe is a version of the D4 enhanced for environmental performance. It is our most compact unit and has FORM 100A Safety approval to meet the harshest environmental operating conditions.
Technical Specification D4 (pdf - 27k)
|
|
view larger image |
D20d/D20i
20 Mbit/s total bit rate
6 signal module slots
3/4 ATR size
DLT-drive for 3.75 hrs recording at 20 Mbit/s (D20d)
AIT-drive for 2.75 hrs recording at 20 Mbit/s (D20i)
With a maximum data rate of 20 Mbit/s and a reliable DLT-drive the D20d is the first choice for long-term missions with multiple signals. No matter if operated in a ground station or airborne the D20d allows a flexible approach to any mission by changing modules to suit the requirements. The D20i is equipped with an AIT-drive. This state-of-the-art data storage system allows faster data access, more efficient data handling and provides even higher data security.
Technical Specification D20d/D20i (pdf - 35 k) |
|
view larger image |
D20f
20 Mbit/s total bit rate
6 signal module slots
3/4 ATR size
Plug-in storage media
The D20f is a robust, high signal capacity system developed to provide
the ultimate flexibility and economy for flight test engineers. 6 module
slots provide extensive choice of signal interface configuration from the
wide range of available interface modules.
Depending on the particular mission requirements data can be stored either onto hard disk, tape or solid state media contained in pluggable media cartridges. The user can immediately deploy the media of choice due to the plug & play functionality of the storage cartridges. The option for instant upgrade and new media types is retained throughout the life of the recorder and affords application, deployment and support possibilities not available to fixed media systems. The D20f provides up to 20 Mbit/s recording speed and SCSI download speed is as fast as the maximum transfer speed of the chosen media.
Technical Specification D20f (pdf - 35k)
|
|
view larger image |
D20ix2
FORM 100 A Safety approval
20 Mbit/s total bit rate
6 signal module slots
3/4 ATR size
AIT-2 drive for 5 hrs recording at 20 Mbit/s
With FORM 100 A Safety approval the D20ix2 has been taken to the limits for rugged,
compact and flexible data acquisition systems. Integrated heating and the internal
shock mounts allow the D20ix to withstand severe environments such as encountered
in fighter aircraft and helicopters.
Technical Specification D20ix (pdf - 77 k)
|
|
view larger image |
GSR20/20f
The GSR20/20f Series are accurate, cost effective ground telemetry recorder/reproducers with 20 Mbit/s total bandwidth capability. They are ideal replacements for old IRIG 106 recorders that were used at low bandwidths, offering greatly improved accuracy at lower cost. They are also ideal reproducers for media recorded in airborne/mobile D12/D20/D20f systems.
The GSR20 provides the ultimate economy by having a built-in media drive, selected
from tape or hard disk. The GSR20f uses the same pluggable tape, hard disk and
solid state media cartridges as used by the D20f. Both are compatible with all
the D Series signal modules, accessories and software.
The GSR20/20f have an optional built-in PC complete with hard drive and Windows operating system. This provides a wide variety of new possibilities with respect to networking and integrated local operation of proprietary and custom signal display, processing and analysis software.
Technical
Specification GSR20 (pdf - 31k)
Technical Specification GSR20f (pdf - 33.6k)
|
|
|
|
